Устройства – Оверлог

AN
Cloth Trimming assistance to heavy material.
Available Model:
747K-514M7, 747Qe-514M7
Self-installation : Y

BK . BK-1
To prevent seam looseness, turn over the thread and then insert into overlock seaming at the beginning of sewing.
. KD207 Hand wheel: Standard equipment of 700K/BK machine, optional for BK device.
. BK232 sewing bed : optional for BK device.
Available Model:
737K-504M5, 747K-514M5, 747K-514M7
737Qe-504M5, 747Qe-514M5, 747Qe-514M7
Self-installation : Y

BKS
700Q’s computerized system precisely controls the movements of presser foot, thread releasing, and needle plate tongue. It makes the tight starting and achieves the requirement of sewing high quality.
Self-installation : Y

CSA
1. One way suction, 1/4 HP more than normal standard.(for rear suction thread trimmer)
2. Quiet, 5dB lower than normal standard.
3. Low temperature. 10% lower than normal standard.
4. Space efficiency. 25% space saved than normal standard.
5. Easy assembly. 25% time saved for assembly.
6. Easy to clean, easy toassemble/disassemble,completed dust collection.
7. Air pressure can be adjustedby demand.
Available Model:
MODEL w/CT
MODEL w/DT
MODEL w/VT
Self-installation : Y

CT
Take thread into trimmer tube by suction motor or air compressor. (Applicable for 4~6 thread machine)
Available Model:
747K,757K,767K
747Qe,757Qe,767Qe
Self-installation : Y

CTE
700Q’s computerized system drives sensor-controlled energy saving device. Electric eye (sensor) checks the fabric edge. Turn the button of control box to set the time of air suction of chain-cutter. It saves the energy consuming of air compressor system and also saves thread consuming.
Available Model:
747QD,757QD,767QD
Self-installation : Y

DK
Overlock machine equipped with the modularized direct-drive servo motors to be more flexible for diversification.
1: Applicable machine
2: Factory code
3: Series number
4: Function level
Self-installation : Y

DT
Take thread into trimmer tube by suction motor or air compressor. (Applicable for top feed RT/FT )
Available Model:
747DFT, 747DRT, 757DFT, 757DRT
Self-installation : Y

EC
Cuts tape/ elastic by pressing the button.
1. EC-K: Standard knife (16 mm“) EC-K-A: Long knife (22 mm“)(1″)
EC-A1: Long knife (1-1/4″)
2.Hand-control button : standard Knee-control paddle (F]EC34-A) : Optional
Knee-control paddle (FEC34-A): Optional
Available Model:
MODEL w/GA/P, MODEL w/LFC-3, MDDEL w/PS,
MODEL w/TA, MODEL w/TG, MODEL w/TR
Self-installation : Y

ECA
Advanced sensor inspects the completion of sewing work and initiates cutting without time lag. ECA is pneumatic type, and ECB is electric type, compatible with air suction slot, which makes the operation more smoothly.
Presser Foot: as:
Available Model:
MODEL w/GA/P, MODEL w/PS, MODEL w/TA, MODEL w/TG, MODEL w/TR
Self-installation : Y

ECB
Advanced sensor inspects the completion of sewing work and initiates cutting without time lag. ECA is pneumatic type, and ECB is electric type, compatible with air suction slot, which makes the operation more smoothly.
Presser Foot: as:
ECB-e Applicable for: Garment factory without air compressor, or Continually short sewing operation without presser foot lifting.
Available Model:
MODEL w/GA/P, MODEL w/PS, MODEL w/TA, MODEL w/TG, MODEL w/TR
Self-installation : Y

GA
Continuous or intermittent random gathering on lower ply.
P: Pipping Folder KV57 (tape width 25mm/ finish width 6mm) is optional. For pipping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P204P.
Available Model:
747K-514H4, 747Qe-514H4
757K-516H4, 757Qe-516H4
Self-installation : Y

GAL
Elastic fabric fine serging with a pull-back device makes flounce/ falbala style. Adjust the pressure of pull-back plate to have big or small waves.
Available Model:
737K-504F2 , 737Qe-504F2
Self-installation : Y

GB
Continuous or intermittent random gathering on lower ply, for top feed model.
P: Pipping Folder KV57 (tape width 25mm/ finish width 6mm) is optional. For pipping with rope inside, presser foot requires a trench, which is marked with P at the end of parts code. e.g. P463P.
Available Model:
747DFT-514H4, 757DFT-516H4
Self-installation : Y

GL
Working glove opening serging with rubber band attachment.
Available Model:
737FS-504M2
Self-installation : N

KB61-A
To convert Cylinder bed machine into flat bed machine. For normal overlock sewing operation.
Available Model:
737FS, 747FS
Self-installation : Y

LF290-A
An optional device to be equipped with LFA (tape feeding device). Untangling the elastic tape by reverse rotation wheel is a pre-feeding process.
Available Model:
MODEL w/LFA
Self-installation : Y

LFA
An optional device to be equipped with LFA (tape feeding device). Untangling the elastic tape by reverse rotation wheel is a pre-feeding process.
□=voltage, 1: 110V, 2: 220V
Available Model:
MODEL w/LFC-3,
MODEL w/TG,
MODEL w/TR
Self-installation : Y

LFC-2S
To Control the elastic tape tension by adjusting the gear.
Presser Foot: as:
EX:
P101-3 for 3 thread
P101-4 for 4 thread
Standard is P101. Special demand by request.
Available Model:
737FS-504M2, 747FS-514M2
Self-installation : Y

LFC-3
To Control elastic tape tension by adjusting the gear.
Presser Foot :
P218-3 for 3 thread
P218-4 for 4 thread
Available Model:
737K-504M2, 747K-514M2
Self-installation : Y

LS
For top feeding tape or elastic.
Available Model:
MODEL w/LFC-3
MODEL w/TG
MODEL w/TR
Self-installation : Y

P(KV57)
Tape width 25 mm / Finish width 6 mm
Available Model:
MODEL w/GA
Self-installation : Y

PS
Overlock sewing with tape binding for strengthening the pocket edge.
PS201: Folder, for tape size 3/8″ (9.5mm)
Available Model:
737K-504M3, 737Qe-504M3
Self-installation : Y

PZ
Overlock sewing for joint between zipper and cloth.
Available Model:
737K-504M3, 737Qe-504M3
Self-installation : Y

ТА
Tape binding by two chainstitch sewing for strengthening the pocket edge.
Standard binder ( tape width 25.4mm/ finish width 6.4mm)
Available Model:
757K-401M2-50, 757Qe-401M2-50
Self-installation : Y

TBK . TB-Q1
700K series Machine base for Full submerger table
Available Model:
Table 700K-T1, Table 700Q-T1
Self-installation : Y

TG
To prevent knit wear shoulder stretching, insert woven tape for strengthening.
P254J-4A: Presser foot for maximun tape width is 13 mm.
Available Model:
747K-514M2, 747Qe-514M2, 747K-514M7, 747Qe-514M7
Self-installation : Y

TR
Applicable for non-woven/ plastic shower cap sewing. Control the tension of elastic by the spring.
Available Model:
737K-504M2, 737Qe-504M2
Self-installation : Y

TU
When stepped on the pedal for sewing, air from compressor vacuums the thread into the trimmer tube, and then the trimmer cuts the thread. The thread waste is collected by the tube.
Available Model:
Model w/CT, Model w/VT, Model w/DT
Model w/FV, Model w/FR
Please Refer Motor Page
Self-installation : Y

TUA-3X
700Q/700QD exclusive suction set is the standard device of sensor-controlled energy saving machine (ECA, ECB, CTE, VTE), which cleans away thread ends (rear suction),cloth waste (front suction) and lint (inner suction). Also, TUA-3X is compatible to 700K series.
■TUA-31/32: Mechanical valve type,
■TUA-33/34: Solenoid valve type,
■TUA-32/34 are equipped with pneumatic presser foot lifter.
Self-installation : Y

TW
Applicable for towel edge sewing.
Available Model:
757K-401,757Ke-401
Self-installation : Y

UC
The pneumatic device solves the problem of curly edge material. The fabric edge is flattened by air before entering the presser foot. Applicable to up-roll, down-roll, and all kinds of curly edge situations, which highly improves the sewing efficiency.
Available Model:
700LD/DKLTP1-1
Self-installation : Y

VT
Take thread into trimmer tube by suction motor or air compressor. (Applicable for 3~4 thread machine)
Available Model:
737K, 747K, 737Qe, 747Qe, 737FS, 747FS
Self-installation : Y

VTE
700Q/700QD’s computerized system drives sensor-controlled energy saving device. Electric eye (sensor) checks the fabric edge. Turn the button of control box to set the time of air suction of chain-cutter. It saves the energy consuming of air compressor system and also saves thread consuming.
Available Model:
737QD, 747QD
Self-installation : Y

WR/LFC-3
Overlock sewing at knit tape edge and then turn it into tube. For swimwear, night gown etc.
Folder size: tape width is 22.2mm, finish tube size is 5mm in diameter.
Available Model:
737K
Self-installation : Y
700KT
700KT
CODE: 700KT
High Speed Top Feed Overlock Machine
- Stitch Length Adjustment: Push-button
- Differential Feed Ratio Adjustment: Lever type
- Lubrication: Fully-automatic
700KS/KST
700UX
700UX
CODE: 700UX/K1
ОПИСАНИЕ
Шиене на джинси.
Специален задвижващ механизъм за зашиване на тежки тъкани като джинси, работни облекла и други.
700L/700LD
700L / 700LD
Базирана на технологията за оверлог на Сируба, значително подобряваме производителността.
CODE: 700L/700LD
700LD
Базирана на богатият опит от серията 700QD, Сируба подобрява технологията за управление в 700LD.
700LD Product Package: Devices and Direct-Drive Control Sets
Remark:
● Standard accessory / # Optional accessory
#1: BK321-4
#2: EC467-A
#3: 1. ECB-A Air-mixed type (suction timing control)
2. TUD-2 Pure Electric type( Suction motor + from &rear suction set )
#4: 1. TUA-31 Air compressor is required.
2. TUD-2 Driven by Brushless motor
#5: TUA-32K Air compressor is required.
TUA-3X 3-IN-1 SUCTION DEVICE